REV’IT! Horizon 2 Pants
The REV'IT Horizon 2 Pants create a fully laminated waterproof suit when paired with the Horizon 2 Jacket.
Grip panels on the backside of the pant prevent sliding on the seat under acceleration or braking, and the use of a YKK slide lock front closure adds comfort to the waist area. Seeflex CE-level 2 knee protectors come standard, as well as extremely thin yet CE-rated SeeSmart hip protectors. Like the jacket, the REV’IT! Horizon 2 Pants are equipped with the VCS | aquadefence system. The sizable ventilation panels at the upper legs can be opened while riding thanks to the Fidlock magnetic fasteners, and once opened they expose two substantial mesh panels that promote air directly to the legs. Two hand pockets allow small items to be carried close. Thanks to the detachable thermal liner, the Horizon 2 Pants can also be used comfortably when temperatures fall.
Protection Features:
- Outer shell: PWR|shell 500D 2L, PWR|shell 1000D 2L, PWR|shell 500D stretch, sure grip, Lorica
- Insulation: detachable thermal liner
- Waterproofing: hydratex | lite (5000mm H2O)
- Breathability: hydratex | lite (5000g/m2/24hrs)
- Composition:
- outer shell: 100% polyamide
- lining: 100% polyester
- thermal lining: 100% polyester (insulation 100% polyester)
- Protection: Seeflex Level 2 CE protection at knees, Seesmart CE-level 1 type B protection at hip (RV33)
- Visibility: laminated reflection at calves
Ergonomic Features:
- Fit: tour fit, regular
- Adjustability: adjustment strap at waist, adjustment tab at ankles and calves
- Ventilation: VCS | aquadefence
- Features: VCS | aquadefence with FidLock magnetic fastener, stretch panel at waistband, short and connection zipper, adjustable protector pockets, calf zipper, YKK slide lock front closure, grip panel at seat
REV’IT! Peninsula Pants
The Peninsula Pants from REV'IT! are dirt-focused adventure pant that leans heavily toward the full off-road side of the spectrum.
The in-the-boot design and reduced weight makes them wear like your typical dirt pant, but tougher materials hold up to season after season of rough-and-tumble abuse. Ripstop 750D Cordura forms the entire chassis. Inserts of PWR|Shell ripstop stretch mesh are added at the thigh, above the knees and across the seat for comfort and mobility. Along the entire inner leg are panels of Monaco performance cowhide to cope with abrasion and hot engine parts. Seesmart CE Level 1 impact armor is included at the knees and hips, and the Peninsulas are tailored to fit comfortably over knee braces or stand-alone body armor. Zippered vents, tacky Suregrip seat pads and cargo pockets at the hips add utility. The tapered leg design fits cleanly into full height dirt boots.
Protection Features:
- Outer shell: Cordura® ripstop | PWR|shell ripstop stretch | sure grip | Monaco Performance cowhide
- Breathability: detachable Hydratex®|G-liner
- Composition: 77% polyamide, 20% leather, 3% polyurethane
- Protection: SEESMART™ CE-level 1 protection at knee and hip
- Visibility: laminated reflective logo
Ergonomic Features:
- Fit: tapered leg | loose fit
- Adjustability: adjustment strap
- Ventilation: zippers | ventilation panel
- Features: B-lock button closure | calf zippers | grip panel at seat | stretch
- Pockets: grip panel at seat | stretch fabric
REV’IT! Apex Pants
The REV'IT! Apex Pants are sport-oriented, racing-inspired leather pants with the protection you need and stretch in all the right places.
Partial ventilation on the upper and lower legs allows you to stay a little bit cooler when things heat and included CE Level 2 armor at the knees and CE Level 1 armor at the hips (along with knee sliders), help keep you safe when scouting for your new favorite riding spots.
Features:
- Outer Shell: Monaco performance cowhide, PWRshell mesh
- Composition: 85% Leather, 9% Nylon, 3% Polyester, 3% Spandex
- Protection:
- Seeflex CE level 2 protection at the knee
- Seesmart CE Level 1, type B hip protector insert (RV30)
- Coccyx protection
- Dual comp knee slider, type A
- Safety seams
- Visibility: Reflection
Ergonomic Features:
- Fit: Race fit
- Adjustability: Adjustment strap
- Ventilation: Partially perforated outer shell
REV’IT! Ignition 3 Pants
The waterproof REVIT Ignition 3 Pants feature a zipped-in and easily detachable hydrates membrane to keep you dry when needed or to remove during warm summer rides.
SeeFlex CE level 2 armor at the knees and SeeSmart CE level 1 armor at the hips cover your bony bits. A removable Hydratex liner provides waterproofing when needed. Just remove the liner to get maximum air flow while still enjoying the protection of leather.
Protection Features:
- Outer shell: Monaco Performance cowhide, dynax mesh, PWR|shell 500D stretch, wax polyester, Lorica
- Waterproofing: detachable hydratex|3L
- Protection: Seeflex CE level 2 protection at knees, Seesmart CE level 1 type B hip protector insert version RV33, safety seams
- Visibility: reflection
Ergonomic Features:
- Fit: tour fit, regular
- Adjustability: Adjustment straps
- Ventilation: ventilation panels
- Features: stretch lips, stretch panels, short and long connection zippers, adjustable protector pockets, hook-and-snap front closure,calf zippers
REV’IT! Offtrack Pants
The Revit Offtrack Pants are the definition of function and versatility.
A detachable thermal liner and detachable waterproof liner keep you warm and dry during wet chilly rides. When the weather clears and the temperatures rise, simply remove the liners and still ride protected with a vented shell that has CE level 2 knee armor and CE level 1 hip armor. Superb protection against the elements let you keep exploring.
Protection Features:
- Outer Shell: polyester 600D, polyester ripstop, Softshell 3L
- Insulation: detachable thermal liner
- Waterproofing and Breathability: detachable hydratex|mesh G-liner
- Protection: Seeflex CE level 2 protection at knees, Seesmart CE level 1 type B hip protector insert – version RV33
- Visibility: laminated reflection
Ergonomic Features:
- Fit: race fit, regular
- Adjustability: adjustment straps, adjustment tabs
- Ventilation: VCS|zippers
- Features: stretch panel, short connection zipper, adjustable protector pockets, grip panel at seat, YKK slide lock front closure , 3D mesh protector pockets
REV’IT! Poseidon 2 GTX Pants
The Rev'it Poseidon 2 GTX Pants provide breathable waterproofing so you can keep riding through all types of inclement weather.
Gore-Tex 2 and 3 layer membranes are laminated against heavy duty textile and Armacor fabric to keep abrasion resistance and water resistance at a maximum. A removable thermal liner and large vents at the thighs allow you to configure the pants to ride in mild to wild weather conditions. Multiple adjustments keep the pants fitting in all the right places and adjustable protector pockets make sure the CE rated armor is positioned correctly.
Protection Features:
- Outer shell: 2-Layer & 3-Layer Gore-Tex nylon 400D fabric, 3-Layer Gore-Tex Pro Armacor fabric
- Insulation: detachable thermal liner
- Waterproofing: Gore-Tex membrane
- Breathability: Gore-Tex membrane
- Protection: Seeflex CE-level 2 protection at knees, Seesmart CE-level 1 type B hip protector insert – version RV33
- Visibility: laminated reflective accents
Ergonomic Features:
- Fit: tour fit, regular
- Adjustability: adjustment strap, adjustment tabs
- Ventilation: VCS | aquadefence
- Features: VCS | panel with FidLock magnetic fastener, stretch panels, short and long connection zippers, adjustable protector pockets, calf zippers, grip panel at seat, YKK slide lock front closure, prepared for REV’IT Strapper suspenders
REV’IT! Factor 4 Pants
Look no further than the REVIT Factor 4 Pants for riders needing to cover their basic needs when on two wheels.
These pants will also keep you safe with Seeflex CE level 2 knee armor and Seesmart CE level 1 hip protectors. The outer shell is a combination of abrasion- resistant polyester and comfortable stretch materials for added protection and comfort.
Protection Features:
- Outer Shell: polyester 600D, polyester ripstop, Softshell 3L
- Insulation: detachable thermal liner
- Waterproofing and Breathability: hydratex|mesh G-liner
- Protection: Seeflex CE level 2 protection at knees, Seesmart CE level 1 type B hip protector insert – version RV33
- Visibility: laminated reflection
Ergonomic Features:
- Fit: tour fit, regular
- Adjustability: adjustment straps, adjustment tabs
- Features: stretch panel, short connection zipper, adjustable protector pockets, calf zippers, grip panel at seat, YKK slide lock front closure, 3D mesh protector pockets
REV’IT! Neptune 2 GTX Pants
The Rev'it Neptune 2 GTX Pants use 3 different technical layers to perform in all 4 seasons' worth of weather.
Functional thigh vents open up to let air pass through or seal off to adjust to changing conditions. A removable Gore-Tex waterproof liner keeps out precipitation while still allowing the pants to breathe. A removable thermal liner provides extra insulation for cold weather rides. CE level 2 armor at the knees and CE level 1 armor at the hips protect your bony parts from impacts. Configure the Rev’it Neptune 2 GTX Pants for the day’s forecast and re-configure when the weatherman is wrong.
Protection Features:
- Outer shell: high density polyester 600D with teflon coating, polyester ripstop with teflon coating
- Insulation: detachable thermal liner
- Waterproofing: detachable Gore-Tex liner with Paclite technology
- Breathability: detachable Gore-Tex liner with Paclite technology
- Protection: Seeflex CE-level 2 protection at knees, Seesmart CE-level 1 type B hip protector insert – version RV33
- Visibility: laminated reflective accents
Ergonomic Features:
- Fit: tour fit, regular
- Adjustability: adjustment strap, adjustment tabs
- Ventilation: VCS | zippers
- Features: stretch panels, short and double long connection zipper, adjustable protector pockets, calf zippers;grip panel at seat, YKK slide lock front closure, prepared for REV’IT Strapper suspenders
REV’IT! Tornado 3 Pants
The Revit! Tornado 3 Pants can be worn in multiple configurations so you'll always be prepared for whatever weather is in the forecast.
A 2-in-1 waterproof thermal liner combines pulls double duty in a single liner to help cut down on bulk. A shell made out of PWR|shell mesh panels and heavy duty textile let the exterior flow air while still protecting from abrasion.
Protection Features:
- Outer shell: polyester rib, PWR|shell mesh, PWR|shell 750D, PWR|shell stretch, PWR|wax 500D
- Insulation: detachable 2-in-1 thermal liner & membrane
- Waterproofing: detachable hydratex | Lite 2-in-1 liner
- Breathability: detachable hydratex | Lite 2-in-1 liner
- Composition: 82% Polyester, 18% Polyamide
- Protection:Seeflex level 2 CE protection at knees, Seesmart CE-level 1 protection at hips
- Visibility: laminated reflection at thighs and ankles
Ergonomic Features:
- Fit: tour fit, regular
- Adjustability: adjustment straps at waist, adjustment tab at ankles
- Ventilation: ventilation panels
- Features: prepared for Strapper suspenders, YKK slide lock front closure, short connection zipper, stretch lips at back and knees, elastic at waistband, stretch panel above knee protector pockets, easy entrance zipper, grip panel at seat, adjustable protector pockets
REV’IT! Spark Air Pants
Fully ventilated, stylish, and technically sound, the REV'IT! Spark Air Pants are for the rider looking to keep it casual in an urban playground.
REV’IT! Component H2O Pants
The Component H2O Trousers from REV'IT! are dirt-focused adventure pants with a waterproof barrier and removable thermal insert.
Along the inner leg are panels of Monaco performance cowhide to cope with abrasion and hot engine parts. Seesmart CE Level 1 impact armor is included at the knees and hips, and the Component H2O Pants are tailored to fit comfortably over knee braces or stand-alone impact armor. Zippered vents, Suregrip seat pads and cargo pockets at the hips add utility. Side zippers at the lower leg with hook and loop adjustment create good boot clearance with the OTB design. A removable thermal lets your riding season grown into the cooler months of fall and spring.
Protection Features:
- Outer shell: Cordura® ripstop 3L | Monaco cowhide | PWR|shell ripstop stretch | Suregrip seat covering
- Insulation: detachable thermal liner
- Waterproofing: Hydratex®|3L lamination
- Breathability: Hydratex®|G-liner
- Composition: 88% polyamide, 12% leather
- Protection: SEESMART™ CE-level 1 protection at knee and hip
Ergonomic Features:
- Fit: loose fit
- Adjustability: adjustment strap at waist, adjustment tab at ankles, 3 position adjustable knee armor
- Features: calf zippers | grip panel at seat | short connection zipper | stretch
REV’IT! Dominator 3 GTX Pants
Dominate all terrain and weather conditions with the Dominator 3 GTX Pants from REV'IT!.
These top of the line pants feature 3-layer GORE-TEX laminate waterproofing, reinforced Armacor fabric in the knees for durability / abrasion resistance, a detachable bib for extra protection against the elements, cargo pockets in the upper leg for extra storage, as well as VCS Aquadefence panels for extra airflow when temperatures climb. Rounding out the package are SEEFLEX CE level 2 knee protectors and SEESMART CE level 1 hip protectors, helping prevent damage to those fragile areas in the event of a fall.
The Dominator 3 GTX Pants represent REV’IT!’s top of line offering thanks
Features:
- 3-layer 400D GORE-TEX Pro fabric construction – 100% waterproof and highly breathable
- 3-layer GORE-TEX reinforced Armacor in the knees for extra durability / abrasion resistance
- VCS Aquadefence ventilation panels on upper legs with Fidlock openings
- Exhaust vents in upper back area of pants
- SEEFLEX CE level 2 knee protectors
- SEESMART CE level 1 protectors in the hips
- Cargo pockets in upper leg area for storage
REV’IT! Airwave 3 Pants
The Rev'it! Airwave 3 Pants are made out of PWR|shell mesh panels reinforced by heavy-duty textiles.
CE rated SEESMART armor protects the knees and hips from impacts. The Revit Airwave 3 Pants will keep you cool and protected even as the temperature climbs. Wear these over pants over your street clothes or even a pair of shorts.
Protection Features:
- Outer shell: high density polyester 600D, PWR|mesh, stretch ripstop, PWR|shell stretch
- Composition:
- outer shell: 100% polyester
- lining: 100% polyester
- Protection: Seesmart CE-level 1 protection at knees and hips
- Visibility: laminated reflection at thighs and ankles
Ergonomic Features:
- Fit: tour fit, wide
- Adjustability: adjustment straps at waist, adjustment tab at ankles
- Ventilation: ventilation panels
- Features: prepared for Strapper suspenders, YKK slide lock front closure, short connection zipper, elastic at waistband, adjustable protector pockets, easy entrance zipper, grip panel at seat
- Pockets: slit pockets
REV’IT! Sand 4 H2O Pants
The Sand 4 H2O Pants are versatile, four-season pants for ADV touring.
At the same time, this fully ripstop polyester shell with inserts of 1000D PWR|Shell remains extremely lightweight. The large, cargo-style stash pockets at the hips are flanked by oversized vertical vents. With the inner liners removed, copious direct venting makes the Sand 4 H2O shell up to the task of serious hot weather riding.
Moving inward, the rider next finds the Hydratex|Lite waterproof liner. This detachable, full length liner uses REV’IT!’s proprietary waterproofing material with fully sealed seams to keep the rider dry. While resistant to water penetration, the Hydratex rain barrier maintains breathability to reduce any greenhouse effect during high effort maneuvers – keeping you comfortable. A thermal liner is the innermost layer of the Sand 4 H2O Pants. Add this liner to extend your rides into the late fall, early spring and even winter.
For protection, the Sand 4’s use a combination of adjustable Seeflex Level 2 armor at the knee and Seesmart Level 1 armor at the hips. Also located at the hips are hook and loop volume adjusters that accommodate any extra slack in the pants when riding the outer shell without inner liners. Additional panels of hook and loop line the lower leg and ankle to adjust for off-road boot clearance and entry. Reflective inserts are located at the cargo pockets and again at the lower leg. Tacky Suregrip material is added to the seat for extra traction on the saddle. Paired with the Sand 4 H2O Jacket, the Sand 4 H2O Pants create an unstoppable kit. For riders with the world in their roll charts, look no further than the Sand 4 H2O Pants.
Protection Features:
- Outer shell: polyester ripstop | PWR|shell 1000D | PWR|shell stretch
- Insulation: detachable thermal liner
- Waterproofing: detachable Hydratex®|G-liner
- Breathability: detachable Hydratex®|G-liner
- Composition: 98% Polyester, 2% Polyamide
- Lining: 100% polyester
- Thermal liner: 100% polyester (insulation 100% polyester)
- Membrane: 100% polyurethane (tricot 100% polyamide)
- Protection: Seeflex CE Level 2 protection at knees, SeeSmart CE Level 1 type B hip protection (RV33)
- Visibility: laminated reflection on the calves
Ergonomic Features:
- Fit: tour fit
- Adjustability: adjustment strap at waist, adjustment tab at ankles, 3 position adjustable knee armor
- Ventilation: VCS I zippers at upper legs
- Features: B-lock button closure | calf zippers | grip panel at seat | short and long connection zipper | stretch
REV’IT! Defender Pro GTX Pants
The 2 layer construction makes the REVIT Defender Pro Pants suitable for comfortable riding in all types of weather.
The GORE-TEX membrane with Micro Grid Backer technology will keep wind and water out and is extremely comfortable to wear. The outer shell is made from strong abrasion-resistant materials and features CE certified protectors at the knees and hips. Furthermore these pants are equipped with ventilation panels and zippers, grip panels, long and short connection zippers, and plenty of adjustment straps all incorporated for your convenience when on the road.
Note: We have found the REV’IT Defender Pro Gore-Tex Textile Pants to run large and suggest going down if you are between sizes.
Protection Features:
- Outer shell:
- PWR shell 750D with Teflon coating
- PWR shell 1000D with Teflon coating
- PWR shell 500D stretch
- Leather panels at the inside of the legs
- Sure grip
- Waterproofing: Detachable GORE-TEX Liner with Micro Grid Backer Technology
- Breathability: Detachable GORE-TEX Liner with Micro Grid Backer Technology
- Composition:
- Outer shell: 93% polyamide, 7% leather
- Lining: 65% polyeste, 34% polyamide, 1% elastane
- Membrane: 56% polyamide, 44% Gore-Tex® membrane (ePTFE)
- Protection:
- SEEFLEX Level 2 CE protection at knees
- TRYONIC Seesoft CE-level 1 type B hip protector insert – version RV01
- PWR shell 1000D with Teflon coating
- Safety seams
- Visibility: Laminated reflection at calf
Ergonomic Features:
- Fit: Tour fit, regular
- Adjustability:
- Adjustment straps at waist
- Adjustment tabs at calves
- VELCRO® brand closures adjustment at calves and ankles
- V-flap at calves and ankles
- Ventilation: VCS I panels, VCS I zipper at legs
- Features:
- Stretch panels at waistband and legs
- Stretch lips at back and knees
- Short and long connection zipper
- Calf zippers
- Adjustable protector pockets
- Grip panel at seat
- YKK slide lock front closure
Leave a Reply