Top 12 Best Waterproof Motorcycle Pants

aramid fiber lining on the front and back for abrasion resistance and variable flow ventilation to keep you cool. These cargo style pants have an abundance of pockets to carry all of your essentials so you’re always at the ready.

Features:

• 4-way stretch Rock Flex heavy duty outer shell
• Aramid fiber lined front & back down past knee level
• Sure Fit dual stretch system hidden inside the waistband
• Variable flow ventilation front thighs
• Two stage adjustable knee armor height
• CE Level 2 knee armor included
• Pockets for optional hip armor
• 2 concealed carry cargo pockets right and left side draw
• Wide elastic strap inside concealed carry pocket to keep your weapon secure against your leg, reinforced fabric to avoid printing
• 2 back zip pockets
• Melt resistant material on lower leg area
• Heavy duty YKK zippers throughout
• Reflective logos and stripes

A 2-in-1 waterproof thermal liner combines pulls double duty in a single liner to help cut down on bulk. A shell made out of PWR|shell mesh panels and heavy duty textile let the exterior flow air while still protecting from abrasion.

 Features:

• Outer shell: polyester rib, PWR|shell mesh, PWR|shell 750D, PWR|shell stretch, PWR|wax 500D
• Insulation: detachable 2-in-1 thermal liner & membrane
• Waterproofing: detachable hydrates | Lite 2-in-1 liner
• Breathability: detachable hydrates | Lite 2-in-1 liner
• Composition: 82% Polyester, 18% Polyamide
• Protection: Seeflex level 2 CE protection at knees, Seesmart CE-level 1 protection at hips
• Visibility: laminated reflection at thighs and ankles
• Fit: tour fit, regular
• Adjustability: adjustment straps at the waist, adjustment tab at the ankles
• Ventilation: ventilation panels

Horizontal open-air vents are positioned across the thighs, just above the knees with exhaust vents at the rear of each thigh. The knee and inside lower leg areas reinforced with highly abrasion resistant ballistic nylon, and the adjustable waist features adjustable hook and loop waist tabs.

Features:

• Designed for any climate
• Constructed of 600D polyester strengthened woven textile for durability and comfort
• Knee and inside lower leg areas reinforced with highly abrasion resistant ballistic nylon
• Removable waterproof and breathable Reissa liner
• Removable thermal liner zips over the Reissa waterproof liner
• Pants may be worn with no liners for warmer days or with the waterproof liner for warm and wet days or with the waterproof liner and thermal liner for truly nasty days
• Horizontal open-air vents are positioned across the thighs, just above the knees with exhaust vents at the rear of each thigh
• Accordion fabric-Spandex textile panels are used in the crotch and down the inside of the thighs for non-binding fit

Gore-Tex 2-Layer Performance is waterproof and breathable to stay dry and comfortable during passing storms. Goat leather on the inner knee adds a bit of tactile grip and heat protection from hot engines. D3O armor at the hips and knees provide CE level 1 impact protection.

Fe​atures:

• Guaranteed To Keep You Dry
• Gore-Tex 2-Layer Performance shell exterior in main body
• Gore-Tex 2-Layer Next Generation 840D Cordura laminate in high abrasion zones
• Long distance ergonomics
• 3M Scotchlite reflective materials for increased low-light visibility
• Goat leather on inner knee protects from heat and adds grip
• D3O T5 EVO XT Level 1 hip and knee armor included
• Adjustable pad pockets
• Cooling fabrics in pad pockets
• Quick adjust knee armor straps keeps armor in place
• 2 front thigh intakes, 2 back thigh exhausts
• 2 front hand pockets, 1 left front thigh pocket
• Standardized jacket-to-pant zipper integration system
• Zippered waist/hip expansion panel
• Adjustable waist cinch straps
• Bottom cuff adjustment
• Hypalon zipper pullers
• Updated waistband construction

Constructed from panels of ultra-flow mesh combined with 450D reinforced fabric for increased abrasion resistance in key areas, the Marco Pant from Sedici has all the bells and whistles without any of fuss. Adjustment points at the waist let you personalize the fit.

Features:

• Durable ultra-flow mesh outer material
• Reinforced 450D material
• Airflow mesh inner lining
• Removable waterproof and windproof liner for protection from the elements
• Ultra-flow mesh outer provides excellent ventilation
• CE Level 2 armor at knees
• Stretch panels above knees and back waist
• Hook and loop adjustable waist
• Side leg zipper opening

Insert hip armor inserts into the armor pockets to add even more protection. Stretch panels at the crotch, knees and rear yoke make it easy to throw a leg over your ride and stay in the saddle all day. A waterproof liner keeps you dry and keeps the wind from cutting through the pants.

 Features:

• Full 600D dobby construction
• 1200D reinforcement on key areas
• Full-length water- and windproof liner
• Rain liner features full mesh lining to manage airflow
• Low-profile YKK zipper attachment along waist to reduce bulk
• 3/4 length thermal liner
• Precurved design with 80 gram of insulation in body
• Tailored for the riding position and low bulk
• Hard mesh inserts at upper thigh, shin and back of leg for massive airflow
• Adjustable knee armor pockets with 3 positions
• 1200D reinforcement at knees and seat
• Carbon black reflective trim with 360 degrees of visibility
• Stretch accordion panels at crotch, knees and rear yoke for comfort and mobility
• Fully adjustable waist with one-handed actuation
• YKK main zipper with rain gutter to keep your dry
• Fully adjustable waist with one-handed actuation
• 2 external zippered handwarmer pockets
• Jacket-to-pants connection zipper to pair with matching Alexi 2 Jacket or other Sedici jackets

The large size of the Joe Rocket Ballistic 7.0 pants means there should be a pair to fit most riders.The protection is good for a pair of fabric pants, and although the outer shell frayed when I slipped down the trail, the inner fabric was intact, and unharmed. my skin too. As with most textile tools, they only needed to be replaced once in a while, but they did the job.

• Heavy duty 630 Hitena twill nylon outer
• 100% waterproof
• Height adjustable CE rated knee protectors
• Removable high-density hip padding
• Removable waterproof liner
• Two-way leg zippers
• Melt resistant material on lower leg area
• Sure Fit adjustable waistband

At the same time, this fully ripstop polyester shell with inserts of 1000D PWR|Shell remains extremely lightweight. The large, cargo-style stash pockets at the hips are flanked by oversized vertical vents. With the inner liners removed, copious direct venting makes the Sand 4 H2O shell up to the task of serious hot weather riding.

Features:

• Outer shell: polyester ripstop  |  PWR|shell 1000D
• Insulation: detachable thermal liner
• Waterproofing: detachable Hydratex®|G-liner
• Composition: 98% Polyester, 2% Polyamide
• Protection: Seeflex CE Level 2 protection at knees, SeeSmart CE Level 1 type B hip protection (RV33)
• Adjustability: adjustment strap at waist, adjustment tab at ankles, 3 positions adjustable knee armor
• Ventilation: VCS I zippers at upper legs
• Pockets: slit pocket  |  waterproof stash pocket

A non-removable waterproof lining backs the outer shell so you’ll never forget your waterproof gear at home. A removable insulated liner extends your riding season into cooler temperatures. CE rated armor covers your knees.

Features:

• 600D Oxford abrasion-resistant main construction
• Waterproof lining
• Removable insulated liner with full circumference zipper at waist
• 100% waterproof lining with taped seams
• Reinforced 1200D Oxford material at seat, knees and hips
• Elasticated waist with adjustable hook and loop side belts
• 2 zippered hand warmer pockets
• 6″ YKK Vislon connection zipper to connect to matching BILT Storm 2 jacket
• YKK zippers throughout

Specifically designed to handle the rigors of on- and off-road riding with equal aplomb, the Carlsbads boast a revamped venting system and maximized mobility. The main chassis is constructed of super tough FPL400 fabric and impact zones are reinforced further with 500D Karbonite Ripstop – as used in the Badlands Pro line.

 Features:

• Gore-Tex performance shell
• 630D Cordora twisted yarn overlays in abrasion zones
• FPL400 main chassis fabric
• Leather inner knees with DWR treatment overlaid on inner leg panels for wear and heat resistance
• D3O CE Level 2 adjustable hip and knee armor included
• Klimatek™ cooling mesh liners at armor pockets
• CE AA certified to prEN 17092-3 garment certification
• 2 thigh intake vents
• Mapped mesh wicking liner with Cordura at inner knee and cuff for wear resistance
• Adjustable cuff design allows for boot and knee brace/guard access
• Jacket-to-pant zipper integration system
• 2 water-resistant storage pockets on the thigh

• 3-layer construction for maximum versatility
• Robust, abrasion-resistant 450D Oxford fabric shell
• Removable 100% waterproof and breathable liner
• Removable quilted thermal inner liner
• Complimentary zippers allow multi-layer functionality between shell and linings
• Air Control System ventilation system throughout
• Airflow inner lining for improved climate control and comfort
• Cargo style patch pockets on legs angled for convenience
• Pull-through waist tab adjusters
• Stretch panels above knees for added comfort in the riding position
• Stretch lower back for a variable fit

Constructed with 500D nylon main material and 1680D nylon reinforcement zones in the seat and knees for durability. Large vents on the front of thighs allow cool air to enter, and smaller vents on the back of thighs allow hot air to exit.

Features:

• 500 denier nylon main material with heavy-duty 1680 denier nylon abrasion zones at knees and seat
• Adjustable vents on the front and rear of the thigh for flow-through ventilation
• Exo-Stitch Safety Seams at critical seams with heavy bar tacking at high-stress areas
• Two large cargo pockets thighs, and two front-hand pockets
• Adjustment straps at the waist with TPU tabs for the perfect fit
• VELCRO® brand closures at knees for adjustability
• NightViz reflective on thighs and lower legs for increased nighttime visibility
• YKK external zippers with urethane coated Black Oxide sliders
• Dual hook front closure with TPU gripper
• Accordion stretch panels at the waist and above the knees for fit and range of motion
• Removable AirGuard waterproof/windproof liner