Dainese Torque 3 Out Boots
The Torque 3 Out Boots are lightweight riding boots ready for the road or track.
Dainese’s D-Axial ankle protection system limits the rotation of the ankle – keeping your joints within biometrically safe parameters in the event of an unplanned dismount. A reinforced hull and hard sliders help to dissipate impact loads and protect smaller foot bones. The D-Stone material used for the upper is highly resistant to abrasion and conceals an inner speed lacing system and a three-dimensional mesh liner. Torque 3 Out Boots are CE Level 2 certified and promise a secure, communicative ride. The Torque 3 Boots are as comfortable carving an apex as they are hustling tank to tank on the interstate.
Features:
- D-Stone main construction
- Standard D-Axial ankle protection system
- Replaceable magnesium sliders on the outer toe and heel
- Internal speed lacing system
- Nylon outer heel slider
- Protective nylon inner hull and toe reinforcement
- Gear shifter guard at toe
- High grip TPU inserts for improved bike feel
- Setscrew wrench included
- Zippered closure at back
- Double jersey air gap liner
- Meets CE – Cat. II – EN 13634 boot certification
Dainese Torque 3 Air Out Boots
Capped with magnesium sliders, the Torque 3 Air Out Boots are ready for the road or track.
The D-Axial ankle protection system limits the rotation of the ankle to keep your joints within biometrically safe parameters. The reinforced hull and hard sliders help to dissipate impact loads and protect smaller foot bones. A speed lacing system secures the inner boot to the rider and is then encapsulated by D-Stone material used for the entire upper. Perforation, air channels and a three-dimensional liner prevent hot spots and aid airflow.
Features:
- Perforated D-Stone main construction
- D-Axial ankle protection system
- Replaceable magnesium sliders on the outer toe and heel
- Internal speed lacing system
- Nylon outer heel slider
- Protective nylon inner hull and toe reinforcement
- Gear shifter guard at toe
- High grip TPU inserts for improved bike feel
- Setscrew wrench included
- Zippered closure at back
- Air canalization system
- Double jersey air gap liner
- Meets CE – Cat. II – EN 13634 boot certification
Dainese Axial D1 Boots
The Dainese Axial D1 Boots were purpose-built for track performance.
Top racers attack international tracks with these bad boys protecting their feet. New Velcro design makes sure these “in-boots” stay securely fastened to the lower portion of Dainese track pants or track suits with the corresponding Velcro. The latest iteration of the Axial D1 uses a redesigned shift guard for even better control and feedback from each shift. The D-Axial system protects your ankle from twisting, impacts and intrusion of foreign objects. Heavy duty D-Stone fabric resists abrasion, breaking and tearing for the ultimate track day boot.
Protection:
- Certified boots to CE – Cat. II – EN 13634 Standard
- D-Axial system in carbon and aramid fiber
- Metal inserts
- Nylon heel
- Reinforced nylon toe
- Replaceable magnesium slider
- TPU rear inner insert
Ergonomics and Comfort:
- D-Stone fabric
- Split cowhide leather inserts
- Microfiber upper
- Double jersey airgap liner
- Zipper closure at the back
- Elasticated inserts
- Speed lacing system
- Suit to boot fastening system
Other Features:
- Gear shifter guard
- Rubber sole with differentiated design
- Setscrew wrench included
Dainese Fulcrum GT Gore-Tex Boots
The Dainese Fulcrum GT Gore-Tex Boots are perfect for the rider looking for a touring boot with Italian pizzazz and guaranteed waterproofing.
Breathable Gore-Tex waterproofing backs full grain cowhide leather to keep your feet dry and looking good. A nylon heel, rigid ankle inserts and thermoformed shin protection all help keep you safe during your tour or commute. Calf adjustment with a medial zipper keep the boot securely fastened. Flexible joints make it easy to operate controls and walk.
Features:
- Calf adjustment with straps
- Closing with zipper and straps at the side
- Flexible joints for extra walking comfort
- Gear shifter guard in TPU
- Reflective inserts
- Rubber sole with differentiated design
- Full grain cowhide leather upper
- Certified boots to CE – Cat. II – EN 13634 Standard
- Nylon heel
- Rigid inserts on ankles
- Thermoformed insert on the shin
- Breathable waterproof GORE-TEX® membrane
Dainese Nexus 2 D-WP Boots
Track day protection designed for sport road riding, the Dainese Nexus 2 D-WP Boots are injected with the racing DNA Dainese is known for.
Certified to CE level 2 and incorporating the D-Axial jointed ankle, replaceable toe sliders and thermoplastic polyurethane shin plate, the Nexus Boots are ready to carve canyons and terrorize twisties. A waterproof D-WP liner keeps water out and feet dry.
Ergonomics and Comfort:
- Zipper closure at the back
- Flexible joints for extra walking comfort
- Calf adjustment with VELCRO® brand fastener
- Microfiber upper
- D-Stone fabric
- Waterproof D-WP interior liner
Protection:
- Thermoplastic polyurethane inserts on the shin
- Nylon heel
- Boot certified to CE – Cat. II – EN 13634 Standard
- Reinforced nylon toe
- Protective nylon inner hull
- Shock absorption insert on the heel
- D-Axial jointed anti-ankle twist back system in TPU
- Replaceable plastic slider (sold separately)
Other:
- High grip TPU inserts
- Gear shifter guard
- Rubber sole
- Setscrew wrench supplied
- Fixed 3D-Bubble Liner air spaces
Dainese Nexus 2 Air Boots
Track day protection designed for sport road riding, the Dainese Nexus 2 Air Boots are injected with the racing DNA Dainese is known for.
Certified to CE level 2 and incorporating the D-Axial jointed ankle, replaceable toe sliders and thermoplastic polyurethane shin plate, the Nexus Boots are ready to carve canyons and terrorize twisties. Areas of perforation keep your feet cool and dry.
Ergonomics and Comfort:
- Zipper closure at the back
- Flexible joints for extra walking comfort
- Microfiber upper
- D-Stone fabric
- Perforated upper
Protection:
- Thermoplastic polyurethane inserts on the shin
- Nylon heel
- Boot certified to CE – Cat. II – EN 13634 Standard
- Reinforced nylon toe
- Protective nylon inner hull
- D-Axial jointed anti-ankle twist back system in TPU
- Replaceable plastic slider
Other:
- High grip TPU inserts
- Gear shifter guard
- Rubber sole
- Setscrew wrench supplied
- Fixed 3D-Bubble Liner air spaces
Dainese Aurora D-WP Women’s Boots
The Dainese Aurora D-WP Women's Boots provide the features a motorcyclist needs to travel throughout the year, rain or shine.
Microfiber and polyamide fabric make up the main exterior with D-WP waterproofing keeping inclement weather at bay. Rigid inserts at the ankles help protect the medial and lateral malleolus with a thermoformed insert protecting the shin. A TPU shifter guard keeps your shifter peg from eating through your boots no matter how aggressive your upshift. The Dainese Aurora D-WP Women’s Boots are the classic touring boot punctuated with Dainese’s signature design.
Features:
- Closing with zipper and straps at the side
- Flexible joints for extra walking comfort
- Reflective inserts
- Rubber outsole with differentiated design
- Soft inserts
- TPU Gear shifter guard
- Upper in microfiber and high tenacity polyamide fabric
- Certified boots to CE – Cat. II – EN 13634 Standard
- Nylon heel
- Rigid inserts on ankles
- Thermoformed insert on the shin
- Waterproof D-WP® interior
Dainese Sports Master Gore-Tex Boots
The Dainese Sports Master Gore-Tex Boots are ideal for burning rubber.
A super comfortable microfiber upper is backed with a Gore-Tex waterproof and breathable membrane and CE certified protectors for total weather and crash protection. Comfortable enough to wear all day yet offering stellar levels of protection, the Sport Master Gore-Tex Boots are the perfect addition to your track kit.
Note: These boots have a narrow fit and slim calves.
Protection:
- AXIAL Distorsion Control System in TPU Certified boots to CE – Cat. II – EN 13634 Standard
- Nylon heel
- Replaceable plastic slider
- TPU rear inner insert
- Gear shifter guard
- TPU inserts
Main Materials:
- D-Stone fabric
- Upper in microfiber
- Breathable waterproof GORE-TEX membrane
Ergonomics and Comfort
- High grip
- Rubber sole with differentiated design
- Closing with zipper at the back
- Flexible joints for extra walking comfort
- Reflective inserts
Dainese Axial D1 Air Boots
The Dainese Axial D1 Air Boots were purpose-built for track performance. Top racers attack international tracks with these bad boys protecting their feet.
New Velcro design makes sure these “in-boots” stay securely fastened to the lower portion of Dainese track pants or track suits with the corresponding Velcro. The latest iteration of the Axial D1 uses a redesigned shift guard for even better control and feedback from each shift. The D-Axial system protects your ankle from twisting, impacts and intrusion of foreign objects. Heavy duty D-Stone fabric resists abrasion, breaking and tearing for the ultimate track day boot. Perforated microfiber panels flow air during those scorching hot track days.
Protection:
- Certified boots to CE – Cat. II – EN 13634 Standard
- D-Axial system in carbon and aramid fiber
- Metal inserts
- Nylon heel
- Reinforced nylon toe
- Replaceable magnesium slider
- TPU rear inner insert
Ergonomics and Comfort:
- D-Stone fabric
- Split cowhide leather inserts
- Microfiber upper
- Perforated microfiber panels
- Double jersey airgap liner
- Zipper closure at the back
- Elasticated inserts
- Speed lacing system
- Suit-to-boot fastening system
Other Features:
- Gear shifter guard
- Rubber sole with differentiated design
- Setscrew wrench included
Dainese Axial Gore-Tex Boots
The Dainese Axial Gore-Tex Boots were purposely built for track performance.
To maintain a lightweight construction, the RT-Race Pro Boots use durable microfiber and strategically-designed injection-molded components, including the iron mesh intake-equipped polyurethane shin plate and shift pad, front and lateral panels, heel counter and Double Flex Control System.
For superior tactile grip on the motorcycle, the entire inner area of the boot is made of abrasion and heat resistant microfiber. Featuring a Michelin dual-compound sole with specific grip areas designed to better interface with the peg, shifter and rear brake, the TCX RT-Race Pro are some of the most articulate race boots on the market.
Note: Customers recommend going up one size from the size chart.
Features:
- Durable, lightweight perforated microfiber upper
- Over-injected front panel to allow an easy step-in and a precise fit around the foot and leg
- Lateral micro-injected panel to ease zipper closure
- Padded rear flex area for a better comfort
- Abrasion-resistant microfiber heat guard for better grip on the bike
- Instep micro-injection with iron mesh air intake
- FFC Fasten Fit Control lacing system
- Soft microfiber gaiter for a perfect fit around the calf
- Air Tech breathable, soft touch mesh lining combined with double density foam for superior comfort around the ankle
- DFC Double Flex Control System
- PU shin plate with iron mesh air intakes and micro injections
- PU shift pad integrated in the sole
- PU heel counter
- Replaceable abrasion-resistant magnesium toe slider
- Magnesium rear and heel sliders
- Outside elastic zipper and VELCRO® brand tab closure
- Micro-adjustable aluminum buckle and PU-toothed band allow perfect fastening of the shin plate around the calf
- Replaceable anatomic extra-light breathable insole
- Reinforced midsole with differentiated thickness
- Double compound Michelin rubber sole with specific grip area inspired by the Power Supersport EVO Tire
- CE certified